ABB Installation Products 35PCJ1M1300
Elastimold 35PCJ1M1300 Insulated Power Cable Joint With Single Piece Housing, 35 kV, 0.85 to 2.12 in Dia Cable, 350 kcmil Conductor, EPDM Rubber
Loadbreak Elbows
7299998
35PCJ1M1300
ABB Installation Products
$0.00
/ ea
- Cable Diameter: 0.85 to 2.12
- Cable Type: Fabric Tape Shielded/Lead Jacketed
- Color: Black
- Conductor size: 350
- Connector Type: Compression
- Dimensions: 2-25/32 in Dia x 14-3/8 in L
- Material: EPDM Rubber
- Number of Conductors: 2
- Insulation Size: 1.37 to 1.63
- Type: Insulated
- Voltage Rating: 35
35kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Conductor. Conductor Size AWG Stranded 350.
- Features
- Power cable joints utilize permanently crimped connectors
- Units have been designed and tested per IEEE standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable, ideally suited to straight splicing of the same or similar cable
- 4677 Cable joint IGCC
- Molded conductive shield provides a virtually indestructible ground shield for true deadfront construction
- Fully shielded, fully submersible molded rubber housing
- Molded conductive insert precludes subjecting entrapped air to electrical stress
- Grounding eye provides a convenient point to connect a ground wire to the molded conductive shield, placing the molded shield at ground potential
- Cable entrance engages the insulation shielding of the cable eliminating the need for taping
- Stranded aluminum conductor