ABB Installation Products 25PCJ1M1360
Elastimold 25PCJ1M1360 Insulated Power Cable Joint With Single Piece Housing, 25 kV, 0.76 to 2.12 in Dia Cable, 750 kcmil Conductor, EPDM Rubber
Loadbreak Elbows
7299968
25PCJ1M1360
ABB Installation Products
$0.00
/ ea
- Cable Diameter: 0.76 to 2.12
- Cable Type: Fabric Tape Shielded/Lead Jacketed
- Color: Black
- Conductor size: 750
- Connector Type: Compression
- Dimensions: 2-25/32 in Dia x 14-3/8 in L
- Insulation Size: 1.37 to 1.63
- Material: EPDM Rubber
- Number of Conductors: 2
- Temperature Rating: -40 to 65
- Type: Insulated
- Voltage Rating: 25
25kV Power Cable Joint Style 1 with Single Piece Housing, Cable Insulation Diameter 1.370 inch to 1.630 inch. Aluminum Conductor. Conductor Size AWG Solid 750.
- Features
- Power cable joints utilize permanently crimped connectors
- Units have been designed and tested per IEEE standard 404 to ensure system matched performance and ratings equal to the cable to which the splice will be installed
- Style 1 uses a single-piece housing that is sized to accommodate a specific range of cable, ideally suited to straight splicing of the same or similar cable
- 4677 Cable joint IGCC
- Molded conductive shield provides a virtually indestructible ground shield for true deadfront construction
- Fully shielded, fully submersible molded rubber housing
- Molded conductive insert precludes subjecting entrapped air to electrical stress
- Grounding eye provides a convenient point to connect a ground wire to the molded conductive shield, placing the molded shield at ground potential
- Cable entrance engages the insulation shielding of the cable eliminating the need for taping
- Solid aluminum conductor